View RD74LVC2G07WPE_4491895.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RD74LVC2G07
Dual Buffers / Drivers with Open Drain
REJ03D0751-0100 Rev.1.00 Oct 30, 2006
Description
The RD74LVC2G07 has Dual buffers / drives with open drain outputs in a 6-pin package. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
The basic gate function is lined up as Renesas uni logic series. Supply voltage range : 1.65 to 5.5 V Operating temperature range: -40 to +85C All inputs: VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs: VO (Max.) = 5.5 V (@VCC = 0 V) Output current: 4 mA (@VCC = 1.65 V) 8 mA (@VCC = 2.3 V) 24 mA (@VCC = 3.0 V) 32 mA (@VCC = 4.5 V) * Ordering Information
Part Name RD74LVC2G07WPE Package Type WCSP-6pin Package Code (Previous Code) SXBG0006LA-A (TBS-6BV) Package Abbreviation WP Taping Abbreviation (Quantity) E (3,000 pcs/reel)
* * * * * *
Article Indication
Marking Year code Month code
KEYM
Function Table
Input A L H H: High level L: Low level Z: High impedance Output Y L Z
Rev.1.00 Oct 30, 2006 page 1 of 6
RD74LVC2G07
Pin Arrangement
0.7 mm Height 0.4 mm 0.4 mm pitch 0.17 mm 6-Ball (WP)
2A
3
4
2Y
GND
2
5
VCC
1.1 mm
Pin#1 INDEX
1A
1
6
1Y
(Bottom view)
(Top view)
Logic Diagram
1A 1 6 1Y
2A
3
4
2Y
Absolute Maximum Ratings
Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Package Thermal impedance Storage temperature Notes: Symbol VCC VI VO IIK IOK IO ICC or IGND ja Tstg Ratings -0.5 to 6.5 -0.5 to 6.5 -0.5 to VCC +0.5 -0.5 to 6.5 -50 -50 50 100 123 -65 to 150 Unit V V V mA mA mA mA C/W C WP Test Conditions
Output : L VCC : OFF or Output : Z VI < 0 VO < 0 VO = 0 to VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum.
Rev.1.00 Oct 30, 2006 page 2 of 6
RD74LVC2G07
Recommended Operating Conditions
Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO Min 1.65 0 0 -- -- -- -- -- 0 Input transition rise or fall rate t / v 0 0 -40 Max 5.5 5.5 VCC 4 8 16 24 32 20 10 5 85 ns / V Unit V V V Conditions
VCC = 1.65 V VCC = 2.3 V mA VCC = 3.0 V VCC = 4.5 V VCC = 1.65 to 1.95 V, 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V
Output current
IOL
Operating free-air temperature
Ta
C
Note: Unused or floating inputs must be held high or low.
Electrical Characteristics
Ta = -40 to 85C
Item Symbol VCC (V) 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Min to Max 1.65 2.3 3.0 4.5 0 to 5.5 5.5 1.65 to 5.5 3 to 5.5 Min VCCx0.65 0.65 1.7 2.0 VCCx0.7 -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max -- -- -- -- VCCx0.35 0.7 0.8 VCCx0.3 0.1 0.45 0.3 0.4 0.55 0.55 5 10 10 A 500 Unit Test condition
VIH Input voltage VIL
V
Output voltage
VOL
V
Input current Off state output current Quiescent supply current
IIN IOZ ICC ICC
A A
IOL = 100 A IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA VIN = 5.5 V or GND VO = 5.5 V or GND VIN = VCC or GND, IO = 0
One input at VCC-0.6 V, Other input at VCC or GND Output leakage current IOFF 0 -- -- 10 A VIN or VO = 0 to 5.5 V Input capacitance CIN 3.3 -- 3.5 -- pF VIN = VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.1.00 Oct 30, 2006 page 3 of 6
RD74LVC2G07
Switching Characteristics
VCC = 1.8 0.15 V
Item Propagation delay time Symbol tZL tLZ Ta = -40 to 85C Min Max 2.4 8.3 Unit ns Test Conditions CL = 30 pF, RL = 1.0 k FROM (Input) A TO (Output) Y
VCC = 2.5 0.2 V
Item Propagation delay time Symbol tZL tLZ Ta = -40 to 85C Min Max 1.0 5.5 Unit ns Test Conditions CL = 30 pF, RL = 500 FROM (Input) A TO (Output) Y
VCC = 3.3 0.3 V
Item Propagation delay time Symbol tZL tLZ Ta = -40 to 85C Min Max 1.5 4.2 Unit ns Test Conditions CL = 50 pF, RL = 500 FROM (Input) A TO (Output) Y
VCC = 5.0 0.5 V
Item Propagation delay time Symbol tZL tLZ Ta = -40 to 85C Min Max 1.0 3.5 Unit ns Test Conditions CL = 50 pF, RL = 500 FROM (Input) A TO (Output) Y
Operating Characteristics
Item Symbol VCC (V) 1.8 2.5 3.3 5.0 Min -- -- -- -- Ta = 25C Typ 16 16 16 18 Max -- -- -- -- Unit Test Conditions
Power dissipation capacitance
CPD
pF
f = 10 MHz
Test Circuit
VTT
RL From Output RL Measurement point
CL *
Note: CL includes probe and jig capacitance.
Rev.1.00 Oct 30, 2006 page 4 of 6
RD74LVC2G07
* Waveforms
tf tr
90% Input Vref 10% t ZL 10% t LZ Vref
90%
VI
GND
VOH Output Vref VOL +V VOL
VCC (V) VI 1.80.15 2.50.2 3.30.3 5.00.5 VCC VCC
Inputs tr / tf 2 ns 2 ns Vref VCC / 2 VCC / 2 1.5 V VCC / 2 CL 30 pF 30 pF 50 pF 50 pF RL 1.0 k 500 500 500
V 0.15 V 0.15 V 0.3 V 0.3 V
VTT VCC x 2 VCC x 2 6V VCC x 2
3 V 2.5 ns VCC 2.5 ns
Notes: 1. Input waveform: PRR 10 MHz, Zo = 50 . 2. The output are measured one at a time with one transition per measurement.
Rev.1.00 Oct 30, 2006 page 5 of 6
RD74LVC2G07
Package Dimensions
JEITA Package Code S-XBGA6-0.7x1.1-0.40 RENESAS Code SXBG0006LA-A Previous Code TBS-6BV MASS[Typ.] 0.0005g
e D ZD
C B
E ZE
B
e
A 1 Pin#1 index 2 A
6x b y1 C xn C A B xn C
Reference Dimension in Millimeters Symbol
C Seating plane
A1 A
yC
Min Nom A A1 0.110 A2 b 0.15 0.17 D 0.70 E 1.10 e 0.40 x y y1 ZD 0.15 ZE 0.15
Max 0.40 0.140 (0.235) 0.19
A2
0.05 0.05 0.20
Rev.1.00 Oct 30, 2006 page 6 of 6
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. http://www.renesas.com/en/network" Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0

▲Up To Search▲

Price & Availability of RD74LVC2G07WPE

	To Download RD74LVC2G07WPE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .